Tel: +86-29-88609367

Intelligent Type Electromagnetic Flowmeter

Intelligent Type Electromagnetic Flowmeter

DESCRIPTION OF PRODUCTS Electromagnetic flow meter is a kind of inductional instrument designed by Faradays' law of electromagnetic induction to measure flow of conductive media in the tube. It adopts the technology of insertion of single chip to realise digital excitation and employs CAN...

Detailed description

Intelligent Type Electromagnetic Flowmeter


DESCRIPTION OF PRODUCTS

 

Electromagnetic flow meter is a kind of inductional instrument designed by Faradays' law of electromagnetic induction to measure flow of conductive media in the tube. It adopts the technology of insertion of single chip to realise digital excitation and employs CAN local fieldbus. Electromagnetic flow meter can realize local indication and output electrical current signal of 4-20mA which can be used to record, adjust and control. Electromagnetic flow meters are widely used in industrial sectors such as chemical industry, environmental protection, metallurgy, pharmaceutical, paper making, water supply and removal etc.

 

Series smart electromagnetic flow meters consist of sensor and smart signal transducer. And it can be classified into two structures--- integral type and remote type according to the set-up form of the sensor and transducer. In terms of integral type electromagnetic flow meters, transducer and sensor directly assembles as a whole and can not be dissociated. It is usually used at the scene where the environmental situation is good. To remote type electromagnetic flow meters transducer composes a product through a special electric cable and sensor. The sensor is installed at the scene and the transducer is installed in the place where the conditions are good. It is usually used at the scene where the environmental situation is poor, such as underground wells, high temperature and the place where people can not reach.

 

PERFORMANCES & FEATURES


1.Simple structures, firm, no movable parts and long operation life
2. No intercepting fluid parts, no pressure loss and fluid clogging
3. No mechanical inertia, quick response and good stability, application in automatic examination, adjustment and
controlling
4. Measuring accuracy not influenced by physical parameters such as style, temperature, viscosity, density and pressure.
5. Employ Teflon or rubber liner and different combination of electrode material such as Hastelloy C, Hastelloy B, 316L,
Titanium and adapt the need of different mediums.
6. Supply many styles of flowmeters such as inline type and insertion type, etc.
7. Adopt EEPROM memory to measure operation data, safe and reliable protection of memory.
8.Integral type flowmeters and remote type flowmeters.
9. LCD back light display with high clearness

TECHNICAL PARAMETER

 

Suitable Diameter

DN25~DN2600 (below DN25 non-standard)

Electrodes Materials

316L (stainless steel), Hastelloy C, Hastelloy B, Titanium, Tantalum

Suitable Fluid

Liquid with conductive ratio more than 5 μs/cm

Measuring Range

0.1~10m/s (extendable to 15m/s)

Upper Limit of Span

0.5~10m/s. 1~5m/s recommended

Accuracy

0.3%, 0.5%,1.0%

Output Signals

4~20mADC, load<= 750ohm, 0~3kHz, 5V with source and changeable width. high terminal and
effective frequency output , RS485 interface

Operation Pressure

1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special)

Fluid Temperature

-20C~80C, 80C~130C,130C~180C Depending on Lining Material

Ambient Temperature

Sensor -40C~80C. transducer -15C~50C

Ambient Humidity

<= 85%RH (at 20C)

Cable Outlet Size

M20×1.5

Power Supply

220VAC±10%, 50Hz±1Hz, 24VDC±10%

Power Consumption

<=8W

Protection Ratings

Integral type: IP65. remote type: sensor IP68,transducer IP65

Materials of Liner

PTFE, soft rubber, hard rubber, PFA, etc

Connection of Flange

National Standard GB9119-88(DIN2051,BS4504)

Earthing Materials

316L (stainless steel), HC, Ti, Ta, Cu

 

 

Price, Package and Service

 

1.Price : FOB SHANGHAI

2. Payment: 100% T/T in advance .

3. Packing : standard export packing , including instructions and certificate

4.Leading time : 7-10 working days.

5.OEM avaliable 

6. Shipment: Express (FedEx, DHL, UPS & TNT) or forwarder

7. 7 days free replace & 1 year free repair for quality warranty

  

 

 APPLICATION

 

Electromagnetic flow meters are widely used in industrial sectors such as chemical industry, environmental protection, metallurgy, pharmaceutical, paper making, water supply and removal etc.

 

 

 

 



Feedback