DCRD1000C6 Guided Wave Radar Level Transmitter
The DCRD1000C6 is suitable for the level measurement of Liquids with low dielectric constant or surface fluctuations.
Detailed description
DCRD1000C6 Radar Level Transmitter
Application: Liquids with low dielectric constant or surface fluctuations
Measuring range: 6meter
Process connection: Screw thread, Flange(optional)
Medium Temperature: -40～250°C
Process pressure: -0.1-2MPa
Accuracy : ± 3mm
Anti-explosion/safety grade: Exia IIC T6 Ga /IP67
Signal output: 4~20mA/HART(Two-wire/ Four-wire) /RS485/Modbus
DCRD1000C6 Model Selection | |||
Model：DCRD1000C6 Probe type：Concentric tube type probe Meter full scale：6000mm Material：stainless steel（flange installation） | |||
Element | Code | Parameter | Note |
Anti-explosion | P | Standard (non-Ex) | |
I | Intrinsic safety (ExiaIICT6 Ga) | ||
Concentric probe | A | 25mm | |
B | 50mm (with flange above DN80) | ||
Process connection/Material | GA | Screw thread G1〞A / stainless steel 304 | |
NA | Screw thread 1〞NPT / stainless steel 304 | ||
A | Flange DN50 PN16C stainless steel | ||
B | Flange DN80 PN16C stainless steel | ||
C | Flange DN100 PN16C stainless steel | ||
D | Flange DN150 PN16C stainless steel | ||
E | Flange DN200 PN16C stainless steel | ||
H | Flange DN250 PN16C stainless steel | ||
Y | Special custom | ||
Seal/Process temperature | P | Common seal/-40...100°C | |
G | High-temperature seal/-40...250°C with radiator | ||
Electronic unit | 2 | (4 ~ 20) mA / (24) V DC / two-wire | |
3 | (4 ~ 20) mA / (~ 24) V DC / HART two-wire system | ||
4 | (4 ~ 20) mA / (~ 220) V AC / four-wire system | ||
5 | RS485/Mod bus | ||
Housing/Protection grade | L | Aluminum / IP67 | |
G | Stainless steel 304 / IP67 | ||
Cable entry | M | 20*l. 5 | |
N | 1∕2 NPT | ||
Live display / Programming | A | With | |
X | Without | ||
Special custom | Y | Special custom | |
